Configuring JUnit

To get started with JUnit, you need to add the required version of JUnit to your project:

<dependencies>
  [...]
    <dependency>
      <groupId>junit</groupId>
      <artifactId>junit</artifactId>
      <version>4.13.2</version>
      <scope>test</scope>
    </dependency>
  [...]
</dependencies>

This is the only step that is required to get started - you can now create tests in your test source directory (e.g., src/test/java).

Different Generations of JUnit support

Surefire supports three different generations of JUnit: JUnit 3.8.x, JUnit 4.x (serial provider) and JUnit 4.7 (junit-core provider with parallel support). The provider is selected based on the JUnit version in your project and the configuration parameters (for parallel).

Upgrade Check for JUnit 4.x

As of Surefire version 2.7, the algorithm for choosing which tests to run has changed. From 2.7 and on, only valid JUnit tests are run for all versions of JUnit, where older versions of the plugin would also run invalid tests that satisfied the naming convention.

When upgrading from a Surefire version prior to 2.7, the build can be run with the flag -Dsurefire.junit4.upgradecheck. This will perform a check and notify you of any invalid tests that will not be run with this version of Surefire (and the build fails). This is only meant to be used as a tool when upgrading to check that all expected tests will be run. It is a transitional feature that will be removed in a future version of surefire.

Provider Selection

If nothing is configured, Surefire detects which JUnit version to use by the following algorithm:

if the JUnit 5 Platform Engine is present in the project
    use junit-platform
if the JUnit version in the project >= 4.7 and the <<<parallel>>> configuration parameter has ANY value
    use junit47 provider
if JUnit >= 4.0 is present
    use junit4 provider
else
    use junit3.8.1

Please note that the "else" part of this algorithm is also a FAQ response:

You depend on the appropriate version of JUnit being present in the project dependencies, or Surefire may choose the wrong provider. If, for instance, one of your dependencies pulls in JUnit 3.8.1 you risk that surefire chooses the 3.8.1 provider, which will not support annotations or any of the 4.x features.

Use mvn dependency:tree, POM dependency ordering and/or exclusion of transitive dependencies to fix this problem.

<plugins>
[...]
  <plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-surefire-plugin</artifactId>
    <version>3.5.2</version>
    <dependencies>
      <dependency>
        <groupId>org.apache.maven.surefire</groupId>
        <artifactId>surefire-junit47</artifactId>
        <version>3.5.2</version>
      </dependency>
    </dependencies>
  </plugin>
[...]
</plugins>

Running Tests in Parallel

From JUnit 4.7 onwards you can run your tests in parallel. To do this, you must set the parallel parameter, and may change the threadCount or useUnlimitedThreads attribute. For example:

<plugins>
    [...]
      <plugin>
        <groupId>org.apache.maven.plugins</groupId>
        <artifactId>maven-surefire-plugin</artifactId>
        <version>3.5.2</version>
        <configuration>
          <parallel>methods</parallel>
          <threadCount>10</threadCount>
        </configuration>
      </plugin>
    [...]
</plugins>

If your tests specify any value for the parallel attribute and your project uses JUnit 4.7+, your request will be routed to the concurrent JUnit provider, which uses the JUnit JUnitCore test runner.

This is particularly useful for slow tests that can have high concurrency.

As of Surefire 2.7, no additional dependencies are needed to use the full set of options with parallel. As of Surefire 2.16, new thread-count attributes are introduced, namely threadCountSuites, threadCountClasses and threadCountMethods. Additionally, the new attributes parallelTestsTimeoutInSeconds and parallelTestsTimeoutForcedInSeconds are used to shut down the parallel execution after an elapsed timeout, and the attribute parallel specifies new values.

See also Fork Options and Parallel Test Execution.

Using Custom Listeners and Reporters

The junit4 and junit47 providers provide support for attaching custom RunListeners to your tests.

You can configure multiple custom listeners like this:

<dependencies>
[...]
  <dependency>
    <groupId>your-junit-listener-artifact-groupid</groupId>
    <artifactId>your-junit-listener-artifact-artifactid</artifactId>
    <version>your-junit-listener-artifact-version</version>
    <scope>test</scope>
  </dependency>
[...]
</dependencies>
[...]
<plugins>
[...]
  <plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-surefire-plugin</artifactId>
    <version>3.5.2</version>
    <configuration>
      <properties>
        <property>
          <name>listener</name>
          <value>com.mycompany.MyResultListener,com.mycompany.MyResultListener2</value>
        </property>
      </properties>
    </configuration>
  </plugin>
[...]
</plugins>

For more information on JUnit, see the JUnit web site.

You can implement JUnit listener interface org.junit.runner.notification.RunListener in a separate test artifact your-junit-listener-artifact with scope=test, or in project test source code src/test/java. You can filter test artifacts by the parameter dependenciesToScan to load its classes in current ClassLoader of surefire-junit* providers.

Since JUnit 4.12 thread safe listener class should be annotated by org.junit.runner.notification.RunListener.ThreadSafe which avoids unnecessary locks in JUnit.

Using a Security Manager (JUnit3 only)

As long as forkCount is not 0 and you use JUnit3, you can run your tests with a Java security manager enabled. The class name of the security manager must be sent as a system property variable to the JUnit3 provider.

The JDK 17 deprecated the class java.lang.SecurityManager and the security manager is not fully supported since JDK 18. The JUnit3 provider fails with enabled system property surefire.security.manager> in JDK 18+.

JUnit4 uses mechanisms internally that are not compatible with the tested security managers and thus this means of configuring a security manager with JUnit4 is not supported by Surefire.

<plugins>
[...]
      <plugin>
        <groupId>org.apache.maven.plugins</groupId>
        <artifactId>maven-surefire-plugin</artifactId>
        <version>3.5.2</version>
        <configuration>
          <systemPropertyVariables>
            <surefire.security.manager>java.lang.SecurityManager</surefire.security.manager>
          </systemPropertyVariables>
        </configuration>
      </plugin>
[...]
</plugins>

Using a Security Manager (All providers)

Alternatively you can define a policy file that allows all providers to run with Surefire and configure it using the argLine parameter and two system properties:

<plugins>
[...]
      <plugin>
        <groupId>org.apache.maven.plugins</groupId>
        <artifactId>maven-surefire-plugin</artifactId>
        <version>3.5.2</version>
        <configuration>
          <argLine>-Djava.security.manager -Djava.security.policy=${basedir}/src/test/resources/java.policy</argLine>
        </configuration>
      </plugin>
[...]
</plugins>

The disadvantage of this solution is that the policy changes will affect the tests too, which make the security environment less realistic.

Using JUnit Categories

JUnit 4.8 introduced the notion of Categories. You can use JUnit categories by using the groups parameter. As long as the JUnit version in the project is 4.8 or higher, the presence of the "groups" parameter will automatically make Surefire select the junit47 provider, which supports groups.

<plugins>
[...]
    <plugin>
        <groupId>org.apache.maven.plugins</groupId>
        <artifactId>maven-surefire-plugin</artifactId>
        <version>3.5.2</version>
        <configuration>
            <groups>com.mycompany.SlowTests</groups>
        </configuration>
    </plugin>
[...]
</plugins>

This will execute only those tests annotated with the @Category(com.mycompany.SlowTests.class) annotation and those tests annotated with @Category(com.mycompany.SlowerTests.class) if class/interface SlowerTests is subclass of SlowTests:

    public interface SlowTests{}
    public interface SlowerTests extends SlowTests{}

    public class AppTest {
      @Test
      @Category(com.mycompany.SlowTests.class)
      public void testSlow() {
        System.out.println("slow");
      }

      @Test
      @Category(com.mycompany.SlowerTests.class)
      public void testSlower() {
        System.out.println("slower");
      }

      @Test
      @Category(com.mycompany.FastTests.class)
      public void testSlow() {
        System.out.println("fast");
      }
    }

The @Category annotation can also be applied at class-level.

Multiple categories can be specified by comma-delimiting them in the groups parameter in which case tests annotated with any of the categories will be executed.

For more information on JUnit, see the JUnit web site.

Since version 2.18.1 and JUnit 4.12, the @Category annotation type is automatically inherited from superclasses, see @java.lang.annotation.Inherited. Make sure that test class inheritance still makes sense together with @Category annotation of the JUnit 4.12 or higher appeared in superclass.